Specifications Batteries 2 “AA”, NiCd Run Time up to 8 hours Charge Time 6 hours Important Safety Information 1. Wear ANSI-approved safety goggles during setup. 2. Keep setup area clean and well lit. 3. Keep bystanders out of the area during setup. 4. Do not setup when tired or when under the influence of alcohol, drugs or medication. 5. Position batteries in proper polarity and do not install batteries of different types, charge levels, or capacities together. 6. This product is not a toy.
5. Replace the Internal Battery Cover and twist the Battery Cap back on. Internal Battery Cover Switch Figure B 4. Remove the tab(s) that disconnected the Batteries during shipment. Make sure that the two batteries are installed correctly. See Figure C. Batteries 6. Insert Nut into nutshaped hole of Stake, then thread in Knob. 7. Choose a location for the Solar Spotlights that receives full, direct sunlight a minimum of 6 hours a day.
Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: REPLACEMENT PARTS, OTHER THAN BATTERIES, ARE NOT AVAILABLE. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
