Product manual

Page 4SKU 95641 For technical questions, please call 1-800-444-3353.
Disconnect the Power Cord Plug from the power source before making any 2.
adjustments, changing accessories, or storing the Boat. Such preventive
safety measures reduce the risk of starting accidently. Always unplug from its
electrical outlet before performing any inspection, maintenance, or cleaning
procedures.
Store out of reach of children and other untrained persons. 3. Never allow Chil-
dren to come in contact with this product.
Maintain with care and keep clean. 4. Properly maintained, this product is easier to
control. Do not use if damaged in any way. Tag and “Do not use” until repaired.
Check for misalignment or binding of moving parts, breakage of parts, and 5.
any other condition that may affect the Boat’s operation. If damaged, have it
serviced before using. Many accidents are caused by poor maintenance.
Use only accessories that are recommended by the manufacturer for your 6.
model. Accessories that may be suitable for one product may become hazardous
when used on another.
SERVICE
Product service must be performed only by qualied repair personnel. 1. Ser-
vice or maintenance performed by unqualied personnel could result in a risk of
injury.
When servicing this product, use only identical replacement parts. Follow 2.
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the product. 1. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. 2. Make sure there is adequate surrounding
workspace.
Always keep all electrical cords away from the propellers on this Boat. 3.
If two Boats with the same radio frequency are used (both with the same 4.
numbers on the Transmitter and/or Receiver), they must be at least 1640’
away from one another in order to maintain adequate transmission control.
Before using in the water perform a distance check to be certain that you can 5.
maintain radio control at least 25’ from Transmitter to Boat with the Antenna
collapsed.