Radio controlled Electric racing boat Model 95641 Assembly And Operation Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Specifications Boat Battery 7.2 V, 1800 mAh, NiMH AC/DC Adapter Input: 120 V~, Output: 9 VDC Transmitter Batteries Required 8 “AA” batteries (sold separately) Radio Control Frequencies 26.995 MHz, 27.045 MHz, 27.095 MHz, 27.125 MHz, 27.145 MHz, 27.
grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 2. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way.
2. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the Boat. Such preventive safety measures reduce the risk of starting accidently. Always unplug from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 3. Store out of reach of children and other untrained persons. Never allow Children to come in contact with this product. 4. Maintain with care and keep clean.
6. NEVER run Boat in swimming pools or bodies of water where people are swimming or playing. 7. NEVER recharge non-rechargeable batteries. 8. Use only batteries of the type recommended. Do not mix old and new batteries. 9. Remove batteries from both the Boat and the Transmitter if they will not be used for a long period. 10. People with pacemakers should consult their physician before using this product.
GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use.
4. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 5. Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.
Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover page of this manual as soon as possible. Note: Save the box and all Styrofoam packing that comes with this Boat. It is helpful for safe, secure storage when it is not in use.
Figure 2 Electric Speed Controller Receptacle from Electric Speed Controller Plug from Battery Pack Battery Pack 4. If the Battery Pack (16) is plugged into the Electric Speed Controller (18), unplug them and remove the Battery Pack (16) from the Battery Compartment so it may be charged completely. See Figure 2. Note: The Rechargeable Battery should be charged fully before its first use in order to get maximum run-time for your Boat. See Charging Instructions on page 10. 5.
CHARGING THE BATTERY To prevent serious injury and fire: • Constantly monitor battery while charging. The AC/ DC Adapter will continue feeding power into the battery and may overcharge it if left unattended. • Only charge battery on fireproof surface that will not be damaged by heat. If the battery is accidentally overcharged, fire may occur. Keep multiple class ABC fire extinguishers nearby. • Do not charge for longer than 5 hours.
Operation Instructions USING THE TRANSMITTER TO STEER Note: See Figure 3 for Transmitter (20) layout. 1. When you push the Throttle Lever on the Transmitter (20) forward, the Twin Propellers will rotate at the same time and speed pushing the Boat forward. 2. When you move the Steering Lever to the left, the Right Propeller will rotate faster and the Boat will turn left.. 3. When you move the Steering Lever to the right, the Left Propeller will rotate faster turning the Boat to the right.
e. Crystal: This shows the channel you are transmitting on. You can order crystals in different channels in order to race with other boats without transmission interference. f. Steering Lever: Used to turn Boat to the left or right. g. Steering Trim: Used to make slight adjustments in order to keep Boat on straight path if Steering Lever is not being used. h. Power Switch: On - Off button. Make sure it is always in the OFF position before picking up the Boat. USING THE BOAT 1.
INSPECTION, MAINTENANCE, AND CLEANING WARNING! Make sure the Power Switch of the Boat is in its “OFF” position and it is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 1. BEFORE EACH USE, inspect the general condition. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
PARTS LIST Part Description Q’ty Part Description Q’ty 1 Deck Cabin 1 10 Motor Housing Screws 4 2 Hull 1 11 Electric Speed Controller Housing 1 3 Antenna Tube 1 12 Electric Speed Controller Screw 1 4 Shaft Strut 2 13 Motor Housings 2 1 ea 14 Battery Box 1 2 15 Battery Box Screws 2 1 ea 16 Battery Pack 1 1 17 AC/DC Adapter 1 4A/4B Left and Right Propellers 5 Shaft Housing 6A/6B Left and Right Drive Shafts 6C Shaft Coupling 7A Motor Shaft Adaptor 1 18 Elec
ASSEMBLY DIAGRAM 4 4 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 07g SKU 95641 For technical questions, please call 1-800-444-3353.
INTERIOR OF CABIN LAYOUT Twin 380 Motors Electric Speed Controller (18) Battery Pack (16) Twin Propeller Shafts SKU 95641 For technical questions, please call 1-800-444-3353.
