Product manual

Page 65For technical questions, please call 1-888-866-5797.Item 60794
• Some vehicles do not allow Scan Tools to control
vehicle systems or components. If the vehicle
under test does not support the EVAP Leak Test, an
advisory message is displayed on the screen.
.............Component Test
The selected mode is
not supported
Press any key to con.
Figure 5.72
4. Wait a few seconds or press any key
to return to previous screen.
5.10 Viewing Vehicle Information
The Vehicle Info. function enables retrieval of Vehicle ID,
Calibration ID, Calibration Verification and In-use Performance
Tracking on 2000 and newer vehicles that support Mode 9.
1. Use Up/Down scroll button to select Vehicle Info. from
the Diagnostic Menu and press ENTER button.
Diagnostic Menu
9/11
On-Board Mon. Test
Component Test
 Vehicle Info. ?
Modules Present
Unit of Measure
Figure 5.73