Product manual

Page 39For technical questions, please call 1-888-866-5797.Item 60693
• If you do not want to proceed with erasing codes, press ESC
button or use Left/Right scroll button to select NO to exit. A
message of “Command Cancelled!” will appear. Wait a few
seconds or press any key to return to Diagnostic Menu.
3. Press the OK button to confirm.
• If the codes are cleared successfully, an “Erase
Done!” confirmation message shows on the display.
Figure 5.9
Erase Codes
Erase Done!
Press any key to con.
Figure 5.9
• If the codes are not cleared, then an “Erase Failure.
Turn Key on with Engine off!” message appears
Figure 5.10
Erase Codes
Erase Failure.
Turn Key on with
Engine Off!
Press any key to con.
Figure 5.10
4. Press any button to return to Diagnostic Menu.