Product manual

Page 34 For technical questions, please call 1-888-866-5797. Item 60693
• If the “LINKING ERROR!” message does not go away,
have the tool inspected by a qualified technician.
7. You will be prompted to erase previously stored data.
• Review previously stored data
thoroughly before erasing.
Diagnostic
Erase previously
stored data to save
data from this test?
YES NO
Figure 5.1
• If no data is stored in the Scan Tool,
above prompt will not show up.
8. If you wish to erase the data, press the OK button; if you do
not want to erase the data, press ESC to exit or use Left/
Right button to select NO and press OK to continue.
9. View a summary of the System Status. Wait a
few seconds or press any key for Diagnostic
Menu (See Figure 5.4) to come up.
System Status
Codes Found 6
Ignition Type Spark
Monitors N/A 3
Monitors OK 3
Monitors INC 5
Figure 5.2