Product manual

Page 19For technical questions, please call 1-888-866-5797.Item 60693
3. Unit of measure: Sets the unit of
measure to English or Metric.
4. Key Beep Set: Turns on/off beep.
5. Status Beep Set: Turns on/off the
I/M Readiness Status beep.
6. Tool Self-test: Checks if the LCD display, LED
lamps and keyboard are working normally.
7. Update Mode: Accesses the Update Mode.
• Settings of the unit will remain until change
to the existing settings is made.
To Enter the Setup Menu
From the Main Screen (See Figure 3.1): Use the Up/Down
scroll button and Left/Right scroll button to select Setup, and
press the OK button. Follow the instructions to make adjustments
and settings as described in the above setup options.
System Setup 1/7
Language
Configure Monitors ?
Unit of Measure
Key Beep Set
Status Beep Set
Tool Self-test
Figure 3.3
Language Setup
•English is the default language.
1. From System Setup screen, use the Up/Down scroll
button to select Language, and press the OK button.