Product manual

Page 16 For technical questions, please call 1-888-866-5797. Item 60693
3.3 Accessories Included
1. OBD II Cable -- Provides power to tool and
communicates between tool and vehicle.
2. USB Cable -- Used to upgrade the Scan
Tool, and to print retrieved data.
3.4 Navigation Characters
1. “$” -- Identifies the control module number
from which data is retrieved.
2. “?” -- Indicates help or Code Breaker information is available.
3. “G” -- Indicates graphic viewing is available.
3.5 Keypad
No solvents such as alcohol are allowed to clean the keypad
or display. Use a mild nonabrasive detergent and a soft cotton
cloth. Do not soak the keypad as the keypad is not waterproof.
3.6 Power
The Scan Tool is powered via the vehicle Data Link Connector
(DLC). Just follow the steps below to turn on the Scan Tool:
1. Connect the OBD II Cable to Scan Tool.
2. Find DLC on vehicle.
• A plastic DLC cover may be found on some vehicles and
will need to be removed before plugging the OBD II cable.
3. Plug OBD II cable to the vehicle's DLC.