Product manual
1
1. Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the code
reader, read this instruction manual first and observe the
following safety precautions at a minimum whenever working on
a vehicle:
z Always perform
automo
tive testing in a safe environment.
z Wear safety eye prot
ection that meets ANSI standards.
z Keep clothing, hair, hands, tools, test equipment, etc. away from
all movin
g or hot engine parts.
z Operate the
vehic
le in a well ventilated work area: Exhaust gases
are poisonous.
z Put b
locks in front of the drive wheels and never leave the vehicle
unatte
nded while running tests.
z Use extreme cauti
on when working around the ignition coil,
distributor cap, ignition wires and spark plugs. These components
create hazardous voltages when the e
ngine
is running.
z Put the transmission in PARK (for automatic transmission) or
NE
UTRAL (for manual transmission) and make sure the parking
brake is engaged.
z K
eep a fire extinguisher suitable for gasoline/chemical/ electrical
fires nearby.
z Don’t
connect or disconnect any test equipment while the ignition
is on
or the engine is running.
z Keep t
he code reader dry, clean, free from oil/water or grease. Use
a m
ild detergent on a clean cloth to clean the outside of the code
reader, when
necessary.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
z WARNING:
This product contains or, when used, produces a
chemical known to the State of California to cause cancer and birth
defects or other reproductive harm. (California Health & Safety Code
§ 25249.5, et seq.)