Product manual

...........Diagnostic Menu...... ......
2/6
1) Read Codes
2) Erase Codes
3) Freeze Frame
4) I/M Readiness
2) A warning message comes up asking for your confirmation.
.............Erase Codes............. ...
Erase trouble codes!
Are you sure?
YES NO
3) If you want to proceed with erasing the codes, press
ENTER/EXIT button to erase.
z If the codes are cleared successfully, an “Erase Done!
message shows up.
z If the codes are not cleared, then an “Erase Failure. Turn
Key on with Engine off!” message displays.
4) Wait a few seconds or press any key to return to Diagnostic
Menu.
z
If you do wish to proceed to erase the codes, then press
SCROLL button to select NO and press ENTER/EXIT. A
Command Canceled” message shows up. Press any key
or wait a few seconds to return to Diagnostic Menu.
4.3 Viewing Freeze Frame Data
1) To view freeze frame, use SCROLL button to select View
Freeze Frame from Diagnostic Menu and press ENTER/EXIT
button.
17