Product manual

SKU 40612 For technical questions, please call 1-800-444-3353. Page 3
WARNING
Read All Instructions and warnings be-
fore using this product.
COMMON SENSE AND CAUTION ARE
FACTORS WHICH CANNOT BE BUILT
INTO ANY PRODUCT; THESE SAFETY
FACTORS MUST BE SUPPLIED BY THE
OPERATOR.
Select a level surface, free from ob-1.
structions, when working with power
tools.
Properly anchor tools to the table 2.
work surface before starting work.
Power tools must be bolted se-
curely to the Power Tool Stand
before using.
When folding or unfolding the stand, 3.
be careful not to pinch ngers.
Align all work supports with work 4.
surfaces.
Wear ANSI-approved safety gog-5.
gles during assembly.
Work supports must be within safe 6.
operating limits, and locked into place
before starting power tools.
When working with long or heavy 7.
workpieces (over 50 lb.) use addi-
tional supports.
Test your work set-up for stability 8.
before beginning work.
Always unplug your power tool when 9.
making adjustments or repairs to the
work set-up area.
Keep Work area Clean and unclut-10.
tered. Clutter, grease and debris can
cause accidents.
Keep children away while tools are 11.
being set up or in use.
Never leave power tools unattended 12.
where children or unauthorized per-
sons can use them.
Do not exceed 550 lb. capacity. Be 13.
aware of dynamic loading! Sudden
load movement may briey create
excess load causing product failure.
Do not operate power tools, or use 14.
this product if over-tired or under the
inuence of drugs, alcohol or medi-
cines.
Do not wear loose clothing or jewelry 15.
when operating power equipment.
Never reach over or across running 16.
power tools.
Always check that adjusting wrench-17.
es or keys are removed from any
machine before starting.
Check for alignment and binding 18.
of all moving parts, broken parts or
other conditions that may affect safe
operation. Any damaged part should
be repaired or replaced by a qualied
technician.
Never force any tool or xture beyond 19.
its design limits. This will damage the
tool, and may cause injury or property
damage.
When repairing this table or any tool, 20.
use only factory original parts.
For replacement parts, contact
Harbor Freight Tools.
MAINTENANCE
Your Mobile / Folding Power Tool
Stand requires very little maintenance.
Keep it clean and dry, and occasionally
put a small amount of machine oil on the
threaded parts.
REV 09c