Product manual

Page 3For technical questions, please call 1-888-866-5797.Item 99701
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
1. If your motorcycle kick stand holds the
vehicle vertically upright, you can use the
kick stand. Otherwise, have an assistant
hold the vehicle vertically upright.
2. Holding the Handle (1), roll the Stand under
the rear of the motorcycle. Align and engage
the Left and Right Support Brackets (4, 5)
with the axle of the motorcycle.
3. When the brackets are firmly engaged, lower
the Handle, lifting the rear of the motorcycle.
Lower the Handle all the way to the floor, which
will create a support base for the vehicle.
CAUTION: Do not attempt to lift the
motorcycle if the Support Brackets are not
fully engaged with the vehicle axle.
4. To raise the vehicle, have an assistant support
the handlebars. Raise the Handle from the
floor, which will lower the motorcycle.
5. Disengage the Stand from the
motorcycle axle, and roll it away.
6. Put the motorcycle on its kick stand.
Store this tool in a safe place.
Parts List and Diagram
Part Description Qty
1 Handle 1
2 Support Arm 2
3 Bracket Cover 2
4 Left Support Bracket 1
5 Right Support Bracket 1
6 Wheel 2
7 Bolt m8 x 50 2
8 Nut m8 2
9 Bolt m6 x 50 6
10 Nut m6 6
11 Bolt m6 x 18 8
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts.