Product manual

ManualsBrandsHarbor Freight Tools ManualsLubricationHarbor Freight Tools Lever Action Grease Gun

Lever Action

Grease Gun

01703 Grease Gun

INSTRUCTIONS AND

PRECAUTIONS

Visit our website at:

http://www.harborfreight.com

Read this material before

using this product.

Failure to do so can result

in serious injury.

SAVE THIS MANUAL.

When unpacking, make sure that the

product is intact and undamaged.

If any parts are missing or broken,

please call 1‑800‑444‑3353

as soon as possible.

2005 by Harbor Freight Tools

or any artwork contained herein may be

reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

Diagrams within this document may not be drawn

proportionally. Due to continuing improvements,

actual product may differ slightly from the

product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement

parts, please call 1‑800‑444‑3353.

Manual Revised 11f

Summary of content (8 pages)

PAGE 1
Lever Action Grease Gun 01703 Grease Gun INSTRUCTIONS AND PRECAUTIONS Visit our website at: http://www.harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑800‑444‑3353 as soon as possible. Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
PAGE 2
Specifications Capacity 14 OZ. Standard Grease Cartridge Function Method Manual (Piston and Lever) Extension Pipe 6 IN. Long Coupler Type 4 Jaw Important Safety Information The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Page 2 1.
PAGE 3
10. Keep work area clean. Cluttered areas invite injuries. 11. Keep children away. Children must never be allowed in the work area. 12. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 13. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Wear restrictive hair covering to contain long hair. 17. Check for damaged parts.
PAGE 4
Filling the Grease Gun Suction Filling Installing Grease Cartridge Cartridge Release Latch Barrel 1. Unscrew and remove the Head from the Barrel. 2. Insert the open end of the Barrel into the grease. Slowly pull the Plunger Rod back while pushing the Barrel deeper into the grease to prevent air pockets from being pulled into the Barrel. 3. When the Plunger Rod is fully extended, remove the Barrel from the grease. Wipe the exterior of the Barrel clean of grease. 4.
PAGE 5
Using a Filler Pump Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Lever Loader Port 1. Pull back on the Plunger Rod until the Plunger Rod is extended only halfway. 2. Remove the Loader Cover Screw. 3. Attach the Loader Port of the Grease Gun to the Filler Valve on the grease container. 4.
PAGE 6
Maintenance and Servicing 1. Before each use, inspect the general condition of the Grease Gun. Check for cracked or damaged parts, misaligned or binding of moving parts, leaking connections, and any other condition that may affect the product’s safe operation. Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. If a problem occurs, have the problem corrected before further use. Do not use damaged equipment. 2.
PAGE 7
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
PAGE 8
3491 Mission Oaks Blvd.