Product manual

Page 9For technical questions, please call 1-888-866-5797.Item 61959
Code Display and Recall
1. To identify the 4-digit code stored
under any device key, turn on the
device whose code will be recalled.
2. Aim the Remote at the device and
press and hold the corresponding
Device Select Control button until
the LED Indicator Light turns on and
stays solid red. Release the button.
3. Press the DISP button. The LED
Indicator will flash and stay on.
4. Determine the numbers in the code by
slowly pressing the number buttons in
sequence (1, 2, 3, 4 etc.) and noting
when the LED flashes. When the LED
flashes, stop pressing. The last number
pressed is the first number in the
code. For example, if the LED flashes
when 2 is pressed, the first number
in the code is 2. After recording the
number 2, press the number buttons
again and note when the LED flashes.
Continue in this manner until all four
numbers in the code are retrieved.
Operation
Using the Remote
1. Since the Remote controls more than
one device, the desired device to
be controlled must first be selected.
To operate a TV, for example, the
Device Select Control button for
“TV” must first be pressed to put
the Remote in the TV mode.
2. The Remote will stay in the selected
mode until it is changed. If the Remote
is in TV mode, the mode must be
changed to operate other devices
like DVD, VCR, satellite receiver
or cable box. For example, if the
Remote is in DVD mode and you
wish to turn off the TV, first press the
Device Select Control button for “TV”
before pressing the ON/OFF button.