Product manual

ManualsBrandsHarbor Freight Tools ManualsSteeringHarbor Freight Tools Inner Tie Rod Removal Set

Inner Tie Rod

Removal Set

Item 69619

INSTRUCTIONS AND

PRECAUTIONS

Visit our website at:

http://www.harborfreight.com

Read this material before

using this product.

Failure to do so can result

in serious injury.

SAVE THIS MANUAL.

When unpacking, make sure that the

product is intact and undamaged.

If any parts are missing or broken,

please call 1-800-444-3353

as soon as possible.

2011 by Harbor Freight Tools

or any artwork contained herein may be

reproduced in any shape or form without the

express written consent of Harbor Freight

Tools. Diagrams within this document may

not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly

from the product described herein. Tools required

for assembly and service may not be included.

For technical questions or replacement

parts, please call 1-800-444-3353.

Specications

Applications

For use with rack and

pinion assemblies on front

wheel drive vehicles.

Not for use with

“Saginaw” type rack and

pinion assemblies.

For hand use only. Not

for use with power tools

(impact wrenches, etc.)

Crowfoot

Wrench Sizes

S.A.E. 1-3/16”, 1-1/4”, 1-7/16”

Metric: 14mm, 17mm, 33.6mm

Summary of content (4 pages)

PAGE 1
Inner Tie Rod Removal Set Item 69619 Instructions and precautions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑800‑444‑3353 as soon as possible. Copyright© 2011 by Harbor Freight Tools®. All rights reserved.
PAGE 2
Important Safety Information General Safety Rules 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Keep children and bystanders away while using this product. Distractions can cause you to lose control. 3. Stay alert, watch what you are doing and use common sense when using this product. Do not use this product while you are tired or under the influence of drugs, alcohol or medication.
PAGE 3
Operating Instructions Read the entire Important Safety Information section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. NOTE: Applications and operating procedures can differ depending on the make and model of vehicle. A generalized description of procedures is as follows: 2. To replace inner tie rod, remove the wheel from the vehicle. 3. Loosen jam nut on outer tie rod. Then remove outer tie rod from the steering knuckle. 4.
PAGE 4
Parts List and Diagram Part Description Qty Part Description Qty 1 Main Socket 1 6 1-7/16” Crows Foot Wrench 1 2 Carrying Case (not shown) 1 7 14mm Crows Foot Wrench 1 3 1-3/16” Crows Foot Wrench 1 8 17mm Crows Foot Wrench 1 4 1-1/4” Crows Foot Wrench 1 9 33.6mm Crows Foot Wrench 1 5 1-5/16” Crows Foot Wrench 1 1 7 6 5 4 8 9 3 90 Day Warranty Harbor Freight Tools Co.