Product manual

Page 2 For technical questions, please call 1-888-866-5797. Item 69055
Specifications
Maximum Capacity
900 lb. for Single Stage;
750 lb. for Two Stage (Combined)
Scaffold Stackable Up To Two Levels Only
Adjustable Mounting Holes 1/2″ Diameter (30 Per Side)
Platform Height 28″ to 71-1/8″ High, Single Stage
NOTE: For additional information regarding the parts listed in the following
pages, refer to the Assembly Diagram near the end of this manual.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards.
Obey all safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety
alert symbol, indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices
not related to personal injury.
Safety Warnings
WARNING Read all safety warnings
and instructions. Failure to follow
the warnings and instructions may
result in electric shock, and/or other
serious injury.
Save all warnings and instructions
for future reference.
1. FOLLOW OSHA GUIDELINES FOR
SETUP, USE AND MAINTENANCE.
2. To avoid contact and shock
hazard, do not use Scaffold
near energized power lines or
electrical lines. Do not contact
unprotected, energized electrical
power lines or equipment with scaffold or
tools. Maintain at least 10 feet from electrical
lines. Consult the power company to shut off
power or insulate/relocate lines if working
closer than 10 feet.
3. Acids and other corrosive substances
may severely affect metal strength
on the Scaffold. Use extreme care
around such materials and follow
instructions. Do not use acids or other
corrosive substances on Scaffold parts.