Product manual

Page 2 For technical questions, please call 1-888-866-5797. Item 61581
Specifications
Overall dimensions 11" L x 8-1/8" W x 5-1/2" H
External AC/DC Power Socket size 3.5mm
Factory Code
This gun safe meets the California DOJ requirements.
Important Safety Information
Installation Precautions
1. Verify that installation surface has no hidden
utility lines before drilling or driving screws.
2. Wear ANSI-approved safety
goggles during installation.
3. Install only according to these instructions.
Improper installation can create hazards.
4. Keep installation area clean and well lit.
5. Keep bystanders out of the
area during installation.
6. Do not install when tired or when under the
influence of alcohol, drugs, or medication.
7. Place the Safe on correct surface.
Only use this Safe on a stable,
level, clean and dry surface that is
capable of sustaining the load.
Use Precautions
1. Unload gun completely, including
chamber, before storing.
2. Lock up guns and ammunition
separately out of children’s
reach and out of sight.
3. Even when stored in gun safe,
use gun-lock to disable gun.
4. Separate gun keys from other keys.
5. Leaving gun unsecured may
result in criminal charges.
6. Do not allow children to play
with or near safe. Keep keys and
codes away from children.
7. Keep clear of Door when closing.
8. Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.
9. Use as intended only.
10. Inspect before every use; do not use
if parts are loose or damaged.
11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. Do not store Keys inside of the Safe.
Place the emergency keys in a location
outside of the safe making sure they are
in a secure location that you can find.
13. Warning: The brass components of
this product contain lead, a chemical
known to the State of California to cause
birth defects (or other reproductive
harm). (California Health & Safety code
§ 25249.5, et seq.)
14. The shelf or wall the Safe is placed on must
support the weight of the Safe and its load.
15. The warnings, cautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
16. The Safe is neither water nor fire proof.
NOTE: Harbor Freight Tools is not responsible
for the loss of any property stored within this safe
due to theft, fire, or any other circumstance.