Blast Gun With Gravity Feed Item 95793 Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Visit our website at: http://www.harborfreight.com Copyright© 2007 by Harbor Freight Tools®. All rights reserved.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Tool Use and Care a. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed. Symbols and Specific Safety Instructions Symbol Definitions b. Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally.
8. WARNING: This product, when used for abrasive blasting and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code § 25249.5, et seq.) 9. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.) 10.
Note: An oiler system should not be used with this tool. The oil will mix with the material being propelled, causing poor results. Functional Description Specifications Max. Air Pressure 90 PSI Air Inlet 1/4 IN. - 18 NPT Hopper Capacity 20 OZ. Air Consumption 7 CFM @ 90 PSI Initial Tool Set Up/Assembly Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 6 For technical questions, please call 1-800-444-3353.
SKU 95793 For technical questions, please call 1-800-444-3353.
General Operating Instructions Operating Instructions Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired. Work Piece and Work Area Set Up 1. If possible, place the workpiece inside a sandblast cabinet (not included).
Cleaning and Maintenance User‑Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. To prevent serious injury from accidental operation: Detach the air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures. To prevent serious injury from tool failure: Do not use damaged equipment.
PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product.
Assembly Diagram 19 20 20 15 14 13 12 11 22 1 10 9 8 7 6 5 16 3 18 21 SKU 95793 17 4 For technical questions, please call 1-800-444-3353.
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
