Product manual

Page 4 For technical questions, please call 1-888-866-5797. Item 61700
8. Install a Bolt on the opposite Leg.
a. Insert a Bolt through the mounting
holes from the inside of the Leg.
b. Add a Split Lock Washer (13) and Nut to the
outer side of the Leg, leaving the Bolt exposed.
c. Tighten securely.
d. Hook the open end of the Leg Locking
Brace over the exposed Bolt.
e. Twist the Locking Knob (7) on the exposed
threads of the Bolt to clamp the Brace in place.
f. Hand tighten. See Figure F.
Leg Locking
Brace (6)
hook end of
Leg Locking
Brace (6)
Locking Knob (7)
Bolt (9)
Figure F
9. Install another Locking Brace and Bolt
to the opposite pair of legs.
10. Set the Sawhorse up on flat level ground.
Tighten any loose hardware. (This helps to
ensure that the sawhorse will sit level.)
11. Repeat the entire assembly procedure
with the other Sawhorse.