Specifications (per Sawhorse) Wood Top Dimensions 32" x 5-1/2" x 1-1/2" Height 30" 1000 lb for each Sawhorse (must be used in pairs) Maximum Weight Capacity IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep assembly area clean and well lit. 4. Keep bystanders out of the area during assembly. 5.
Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. On the Wooden Board (1), measure 3-3/8" from each end of the Wooden Board. Mark a line with a pencil. 6. Attach the Brace (4) between two of the Legs on one side of the Sawhorse. See Figure C. 2. Line up the wide end of the Leg Mounting Bracket (2) with the line.
8. Install a Bolt on the opposite Leg. a. Insert a Bolt through the mounting holes from the inside of the Leg. hook end of Leg Locking Brace (6) b. Add a Split Lock Washer (13) and Nut to the outer side of the Leg, leaving the Bolt exposed. c. Tighten securely. d. Hook the open end of the Leg Locking Brace over the exposed Bolt. Leg Locking Brace (6) Bolt (9) e. Twist the Locking Knob (7) on the exposed threads of the Bolt to clamp the Brace in place. f. Hand tighten. See Figure F.
Operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired. Before use, double check that the Leg Locking Braces are securely attached to the bolts. Set Up 1. Lay the Sawhorse on the ground, Wooden Board face down. Pull the Legs out on each side. 2.
Parts List and Diagram Parts List (Parts for each sawhorse. 2 sawhorses included.
Assembly Diagram 2 1 8 10 3 9 9 13 6 12 10 9 11 9 7 4 15 5 14 Item 61700 For technical questions, please call 1-888-866-5797.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
