Product manual

Page 7For technical questions, please call 1-800-444-3353.Item 61540
Light Assembly
For each light:
1. Remove the Bolt at the top of the housing
and open the Lamp Cover. See Figure D.
Bolt
Figure D
2. The bulb is shipped in a protective
box inside the light.
3. Insert the Bulb into the Bulb Socket.
CAUTION: Do not touch the Bulb with your bare
hands; oil from skin will drastically shorten the life
span of the bulb if not cleaned with rubbing alcohol
and allowed to dry before use. Handle the bulb with
a soft, clean cloth or clean work gloves instead.
4. Close the Lamp Cover (22) and
secure with the Bolt (25).
5. Place Handle (1) over end of Bolt (25) and
secure in place with Wing Nut (2).
6. Gently squeeze the Wire Cover (23) while
placing its four tabs into the Lamp Cover (22).
Secure the tab on the Wire Cover to the Lamp
Cover using the Screw (52). (See Figure E)
52
2322
Figure E