Product manual

Page 6 For technical questions, please call 1-800-444-3353. Item 61540

Set Up Instructions

Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this

manual, including all text under subheadings therein before setup or use of this product.

Risk of accidental starting, resulting in serious personal injury. Turn the Power Switch of the Light

OFF and unplug it from the electrical outlet before assembling or making any adjustments.

Deviation from the assembly instructions may result in a risk of re or electric shock.

Note: For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

Tripod Setup

1. Loosen the Leg Knob (43) and swing the three Legs

(46) out and down. Then tighten the Leg Knob.

(See Figure A.)

43 46

Figure A

2. Attach the lamp assemblies to the Lamp Mounting

Bar (55), using the Knobs (53) and Nuts (54).

(See Figure B)

Figure B

3. Place the bracket on the Y-connector (56)

on the Lamp Mounting Bar (55) so that the

holes in the center line up. Insert the Knob

(53) through the holes. (See Figure C.)

4. Place the Lamp Mounting Bar (55) onto the Upper

Tube (38) and secure it in place with the Knob (53).

(See Figure C.)

Figure C