Product manual
Page 3For technical questions, please call 1-800-444-3353.SKU 68385
3.
Figure 3Figure 3
Bolt the Upper Wheel Bracket (3) to the Main Frame (1)
using two Bolts (9) and Washers (8).
4.
Figure 4
Slide the Upper Wheel Shaft (2) through one side of the
Bracket (3), a Washer (7), Bearing (6), Upper Wheel
(5), Bearing (6), Washer (7) and through the other side
of the Bracket. Secure in place with the Circlips (4) at
each end.
5.
Slide the Adjustable Shaft (16) into the top of
the channel of the Main Frame. Thread the
Locking Nut (32) onto the Guide Bolt (31). Align
the slot in the Shaft with the Bolt hole, and î‚¿nger
tighten the Bolt. Make sure the Shaft will not
turn but can still slide up and down freely, then
secure bolt in place with the Locking Nut.
6. Thread the Ball Handle (15) onto the Release Handle
(14) and the Handle into the bar on the Lower Wheel
Bracket (13). Place the Bracket on top of the Shaft (16).