Product manual

Page 2 For technical questions, please call 1-800-444-3353. SKU 68385
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning
of this document including all text
under subheadings therein before
set up or use of this product.
Note: For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
Unpack the English Wheel components and lay
out on the oor where the unit will be located and
mounted. The oor must be able to support the
weight of the English Wheel and the work pieces.
1.
a
bc
Figure 1
To attach the legs and footing:
a. Using two Bolts (25), and Washers (26) attach
the Back Leg (27) to the Connecting Brace (24).
b. Attach the other end of the Connecting Brace
(24) to the Front Footing (22) with the remaining
two Bolts (25) and two of the Washers.
c. Attach the Front Leg (28) to the top of the Front
Footing (22) with four Bolts (23) and Washers (26).
2.
Figure 2
With the help of at least two other people, lift the
Frame (1) and place it on the assembled legs and feet,
aligning the bracket holes. Bolt in place with the four
Bolts (29), eight Washers, and four Nuts (30).Check
that the Frame is square, then securely tighten all bolts.