Product manual

Page 5For technical questions, please call 1-888-866-5797.Item 61778
SAFETYOPERATIONMAINTENANCE SETUP
5. Grip workpiece as lightly as possible (while still
keeping safe control of it). Let the tool do the work.
6. To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
SAVE THESE INSTRUCTIONS.
Specifications
Electrical Rating 120VAC / 60Hz / 0.35A
Motor No Load Speed 1700 RPM
Working Capacity 9/64" to 25/64" (3mm - 10mm)
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Adjusting the Grinding Wheel
1. Turn the Adjustment Knob to the right
to raise the wheel. This will give you an
aggressive cutting action. This is also useful
when you are working with short bits.
2. Lower the wheel by turning the Knob to
the left. This is desirable when you wish
a finer ground edge, though it will take
longer and require more repetitions.
Functions
Adjusting Knob
Power Switch
Drill Index