Product manual

Item 95205 For technical questions please call 1-888-866-5797. Page 5
3. Pressing the On-Auto-Off button to the AUTO setting will set the Timer to turn ON and OFF at
selected intervals.
4. Pressing the On-Auto-Off button to the OFF setting will turn the Timer OFF.
Options for Setting Day(s) of the Week
During the Timer On/Off Setting mode, as shown on page 3-”Setting the Timer”, do the following:
1. To set the Timer to go on DAILY: Press “WEEK” once. The display will show Mo-Tu-We-Th-Fr-
Sa-Su.
2. To set the Timer for one specific day: Press “WEEK” two times until the desired day of the week
shows.
3. To set the Timer for Monday through Friday: Press “WEEK” until the display shows Mo-Tu-We-
Th-Fr.
4. For Saturday and Sunday only: Press WEEK until Sa-Su shows.
5. For Monday through Saturday (Sunday excluded): Press “WEEK” until Mo-Tu-We-Th-Fr-Sa
shows.
6. For Monday-Wednesday-Friday only: Press “WEEK” until Mo-We-Fr show.
7. For Tuesday-Thursday-Saturday only: Press “WEEK” until Tu-Th-Sa show. Set program.
8. For Monday-Tuesday-Wednesday only: Press “WEEK” until Mo-Tu-We show. Set program.
9. For Thursday-Friday-Saturday only: Press “WEEK” until Th-Fr-Sa show. Set program.
10. Press “R” at any point to cancel the current setting. Pressing R again will take you back to the
previous option.
To Set Random On and Off Times
The Timer can be set to randomly change the ON and OFF times within a range of 2 minutes to
32 minutes. Press the WEEK button and the HOUR button down at the same time. The LCD
readout will show ‘O’ on the right of the screen.
Recharging
After plugging in the Timer to recharge, the display will not reappear. To make the display
appear, push the tiny round button next to the “R” for reset.
Troubleshooting
Timer does not turn On or Off.
a. Make certain clock has been set using the correct Military Time conversion.
b. Make certain that both an On and OFF time have been specified.
c. Timer should be on AUTO setting.
d. Make certain timer is set for same outlet and appliance. Verify that “1 ON” and “1 OFF” are set
for each appliance on the corresponding side.
Note: Do not open or try to repair this unit. There are no parts available for this product.