Product manual

Page 6 For technical questions, please call 1-888-866-5797. Item 67143
Operating Instructions
1. Turning Unit On: Press button once.
2. Selecting Measurement Mode:
a. Press and hold button for about
3 seconds to enter setting
mode. (Reading will disappear
and a symbol will flash on
and off in the LCD display.)
b. While symbol is flashing,
press and release button
to cycle through the four
different operating modes:
c. When flashing symbol for the
desired mode is displayed, release
the ON/SET button. The system
will lock onto the selection
d. Remove Probe Cover.
3. Performing Measurement:
a. Temperature is displayed
immediately after selecting
Celsius or Fahrenheit Mode.
b. Measure moisture by
driving probes into wood or
material being measured.
4. Automatic Power Off: In any
mode, meter will turn off after
about 15 seconds of inactivity.