Specifications Measurement Range Timber, Paper, Cardboard Mortar, Concrete, Plaster 6 ~ 42% 0.2 ~ 2.0% Accuracy Reading < 30%:± 2% Reading < 1.4%: ± 0.1% Reading > 30%:± 4% Reading > 1.4%: ± 0.2% Resolution 1% 0.1% Battery 1.
Important Safety Information Use Precautions 1. Do not use for food safety or medical applications. 2. This product is not a toy. Do not allow children to play with this item. 3. Use as intended only. 4. Inspect before every use; do not use if parts loose or damaged. 5. Contains button cell battery. Keep out of reach of children. Discard used batteries immediately. Do not allow children to play with this device. Item 67143 6. Risk of Fire and Burns. Do Not Open, Crush, Heat or Incinerate battery.
Components Probe Cover DIGITAL MINI Probe LCD Display Button Battery Cover Before Initial Use 1. Open battery cover. Turn meter over, grasp batter cover, and slide in direction of arrow. Page 4 2. Remove insulating paper from between the batteries, and then close battery cover. For technical questions, please call 1-888-866-5797.
Meter Uses The Digital Mini Moisture Meter can be used to measure environmental temperature and the moisture of cut timber, paper, cardboard, mortar, concrete, and plaster.
Operating Instructions 1. Turning Unit On: Press button once. 2. Selecting Measurement Mode: a. Press and hold button for about 3 seconds to enter setting mode. (Reading will disappear and a symbol will flash on and off in the LCD display.) b. While symbol is flashing, press and release button to cycle through the four different operating modes: c. When flashing symbol for the desired mode is displayed, release the ON/SET button. The system will lock onto the selection d. Remove Probe Cover.
Maintenance 1. Keep meter dry and clean. Wipe clean with moist cloth as needed. 2. When the Replace Low Battery indicator is displayed, replace batteries. 3. For extended storage, remove the batteries and keep the Moisture Meter in a dry location in temperatures between -10° ~ 50°celsius or -14° ~ 122°farenheit. Item 67143 4. To replace batteries: turn meter over, grasp battery cover and slide in direction of arrows as shown in photo below. Be sure polarity is correct when replacing batteries.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
