Product manual
Page 4For technical questions, please call 1-800-444-3353.SKU 46800
PRODUCT OVERVIEW
The Engine Compression Test Set measures cylinder pressure on diesel-
equipped cars and trucks. The Gauge (1) features a release valve, 14.5” of high
pressure hose, a dial reading from 0-1,000 PSI, a 0-70 bar, and a swivel end
quick coupler for convenient connection to the Adapters (2 through 14).
APPLICATIONS TABLE
NOTE: All parts mentioned below refer to the parts shown on page 6 of this manual.
Part Application Engine Testing Port Thread
260-05 (Part # 2)
Bacharach
Allow a Bacharach Brand adapter to
be used without tester. No. 260-01
260-14 (Part #3)
Case, J. I.
70 series, 188 & 207 C.I.D. pencil
nozzle
Fuel Injector
Caterpillar 1100 and 3208 series Fuel Injector
Deere, John
Early 300, 400 and 500 series, 276,
404, and 531 C.I.D.
Fuel Injector
Waukesha D155D Fuel Injector
260-13 (Part #4)
Caterpillar
“Capsule” type nozzles including
models D-336, 1674, 1676, 3406,
3408 and 3412
Fuel Injector
260-08 (Part #5)
Cummins
These 5.5” bore engines: NH (855
cubic inches), V-6, V-8, V-12 & 903
v-8 Cylindrical PTB
Fuel Injector
260-04 (Part #6)
Cummins
V-185, V210, V225, V555, VT-255,
VT555
Fuel Injector
260-12 (Part #7)
Detroit Diesel
53, 71, 92, 110, 149, V53, V71 with
low or high clamp injector hold down
Fuel Injector
260-06 (Part #8)
Mercedes Benz
12mm is for Model 300 & 300 Turbo
diesel from 1978 and the 250 &
350 Turbo models. 18mm is for all
regulater Mercedes Benz engines &
model 300 prior to 1978
Glow plug
12mm-1.25
and
18mm-1.50
REV 10g