Product manual
Page 2For technical questions, please call 1-800-444-3353.SKU 46800
SPECIFICATIONS TABLE
Material Carbon Steel, Hardened Tips, High Pressure Hose
Finish Chrome Plated Guage, Black Oxide Adapters with Zinc
Weight 11 lb
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, applications
instructions, inspection, maintenance, and cleaning procedures. Keep your
invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered,
damp or wet work areas invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do
not allow children to handle this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment
should be stored in a dry location to inhibit rust. Always lock up
tools and equipment and keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgment or reîexes
are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
5. USE EYE PROTECTION. Wear ANSI approved safety
impact eyeglasses when using this product.
6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when working
with this product. Do not wear loose clothing or jewelry as they can become caught
in moving parts. Wear a protective hair covering to prevent long hair from becoming
caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up above elbows.
7. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
8. DO NOT OVERREACH. Keep proper footing and balance at all
times to prevent tripping, falling, back injury, etcetera.
9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do
not use this product when you are tired or distracted from the job at hand.
10. CHECK FOR DAMAGED PARTS. Before using this product, carefully
check that it will operate properly and perform its intended function. Check
for damaged parts and any other conditions that may affect the operation of
this product. Replace or repair damaged or worn parts immediately.
11. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only
REV 10g