Product manual

Page 6 For technical questions, please call 1-800-444-3353. Item 60642

Replacing the Bulb

1. Turn off the Lamp and unplug the Power

Cord from the outlet. Allow the lamp to

cool completely. The Bulb may still be hot

even after the lamp housing is cool.

2. Lay the Lamp down and set the

Adjusting Knobs so that the Lamp rests on

the work area with the Bulb facing up.

3. Use a screwdriver (not included) to remove the five

Screws securing the Bulb Cover. (See Figure B.)

Bulb

Cover

Screws

Not

Shown

Figure B

4. Lift the Bulb Cover away from the Lens Frame.

Note: Be careful when removing Bulb Cover; the Lens is

loosely attached to the Lens Frame and could pop out.

5. Pull the Bulb out of the Clips in the

Lens Frame. (See Figure C.)

Bulb

Clips

Lens

Frame

Figure C

6. Pull the Bulb out of the Bulb Socket. Properly

dispose of the old Bulb and attach a new

Bulb to the Bulb Socket. (See Figure D.)

Bulb

Socket

Bulb

Cover

Figure D

7. Push the Bulb into the Clips and put the Bulb

Cover back into place so that the screw holes

align with holes along the Lens Frame.

8. Fasten the Bulb Cover to the Lens Frame

using the five Screws. Do not overtighten.

9. Once all connections are secure, return

the Lamp to its normal position. .