Product manual

Page 5For technical questions, please call 1-800-444-3353.Item 60642
Operation
1. Plug the Power Cord into the nearest
two or three prong outlet.
2. Turn on the Lamp by pushing the Power
Switch to the “I” (On) position.
3. Use the Upper and Lower Adjusting
Knobs to reach the desired angle.
4. To use the Lamp’s lens, lift up Lens Cover.
5. After each use, shut the Lens Cover, turn off the
Lamp by pushing the Power Switch to the “O” (Off)
position and remove the Power Cord from the outlet.
Maintenance Instructions
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY: Unplug the Lamp, turn the Power Switch off and allow Bulb to
cool completely before performing any inspection, maintenance, or cleaning procedures.
1. BEFORE EACH USE, inspect the general
condition of the Lamp. Check for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring or cable insulation, and
• any other condition that may
affect its safe operation.
2. Keep Lamp clean and free of dirt, debris, or grease.
3. For longer working life, protect Lamp
from sunlight and moisture.
4. AFTER USE, wipe external surfaces
of the Lamp with clean cloth