WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Power Cord Safety 1. A short power supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. 3. If an extension cord is used: a. The marked electrical rating of the extension cord should be at least as great as the electrical rating of the lamp. 2. Extension cords are available and may be used if care is exercised in their use. b.
Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before setup or use of this product. Functions Spot Lens Lens Cover Lens Frame Upper Adjusting Knob Bulb Cover (not shown) Lens Lower Adjusting Knob Arm Power Switch (not shown) Power Cord (not shown) Base Figure A Page 4 For technical questions, please call 1-800-444-3353.
Operation 1. Plug the Power Cord into the nearest two or three prong outlet. 2. Turn on the Lamp by pushing the Power Switch to the “I” (On) position. 4. To use the Lamp’s lens, lift up Lens Cover. 5. After each use, shut the Lens Cover, turn off the Lamp by pushing the Power Switch to the “O” (Off) position and remove the Power Cord from the outlet. 3. Use the Upper and Lower Adjusting Knobs to reach the desired angle.
Replacing the Bulb 1. Turn off the Lamp and unplug the Power Cord from the outlet. Allow the lamp to cool completely. The Bulb may still be hot even after the lamp housing is cool. 5. Pull the Bulb out of the Clips in the Lens Frame. (See Figure C.) Lens Frame 2. Lay the Lamp down and set the Adjusting Knobs so that the Lamp rests on the work area with the Bulb facing up. 3. Use a screwdriver (not included) to remove the five Screws securing the Bulb Cover. (See Figure B.
Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Other than the Bulb, replacement parts are not available for this item. Item 60642 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.