Product manual

Page 3For technical questions, please call 1-888-866-5797.Item 67651
Operating Instructions
Power
Switch
Reflector
Light Bulb
Socket
(Not Shown)
Power Cord
Spring
Clamp
Figure B
1. Screw the Reflector onto the
Light Bulb Socket.
2. Firmly screw in a 100 Watt, 120 Volt, Type A
bulb (not included). (See Figure B)
3. Use the Spring Clamp to clamp the Light firmly
onto the desired object, making sure the object
being clamped onto is capable of supporting
the weight of the Clamp Light. (See Figure B)
4. Adjust the Clamp Light so that its beam will
center on the object intended to be illuminated.
5. Plug the Power Cord into the nearest 120 volt,
grounded, electrical outlet. (See Figure B)
6. Turn the Clamp Light on by pressing
its Power Switch. (See Figure B)
7. When finished using the Clamp Light,
press the Power Switch to turn off the
Light, unplug its Power Cord from its
electrical outlet, and allow it to completely
cool down prior to removal/storage.
8. When storing, make sure to keep the Clamp
Light in a clean, dry, safe location out of reach
of children and other unauthorized persons.
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Replacement parts are not available.