Product manual

Page 8 For technical questions, please call 1-800-444-3353. Item 60739

4. Use the pattern in Figure C as a reference, or

hold the assembled Dust Reclaimer against the

wall where you intend to mount it, and mark the

drill hole positions through the mounting holes.

5. Drill holes in the wall to except the Wall Anchors (33).

Use a concrete drill bit that is 5/16″ diameter.

NOTE: The Wall Anchors (33) are intended

for concrete walls. If you are attaching the

Dust Reclaimer Kit to drywall or wood you will

need different fasteners (not included).

CAUTION! When mounting the Dust Reclaimer

to a wall surface, make sure that the wall and the

mounting hardware used are capable of supporting

the weight of the Dust Reclaimer and its contents.

Prior to drilling mounting holes in a wall surface,

check to make sure there are no hidden electrical

cables, gas or plumbing pipes in the drilling path.

1.57″1.57″ 9.73″

9.52″

Figure C