Product manual

Page 3For technical questions, please call 1-800-444-3353.Item 60652
Assembly Instructions
1. Examine Handlebar (12) assembly
to make sure that rail on Insert (17) is
aligned with and fits into slot on bottom of
Handlebars, as shown to the right.
2. Insert Handlebar assembly
into Frame (8) as shown in Figure A.
Note: Although they are illustrated separately,
the Bolt (13) and Insert (17) should already be
part of the Handlebar assembly at this point.
3. Align Handlebars carefully with Front Wheel (1) while
tightening the Bolt (13) at the top center of them.
If needed, have an assistant hold the Handlebars
straight while tightening this Bolt.
Insert (17)
Handlebars (12)
Bolt (13)
Frame (8)
Figure A: Handlebar Installation
4. Thread the left Pedal (5a) onto the crank clockwise.
Thread the right Pedal (6a) onto
the crank counterclockwise.
Left
Pedal (5a)
(clockwise)
Right
Pedal (6a)
(counterclockwise)
Figure B: Pedal Installation
5. Use 4 Bolts and Nuts to attach the
Rear Frame (10) to the Frame (8).
Frame (8)
Rear
Frame (10)
Figure C: Rear Frame Installation