Specifications Tricycle Height Front Wheel Back Wheels Age Range Weight Capacity 26″ 5/8″ Axle Diameter, 13″ Pneumatic Knobby Tire 5/8″ Axle Diameter, 10″ Pneumatic Knobby Tire 5 and up 150 lb. IMPORTANT SAFETY INFORMATION Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings and instructions for future reference. 1. AGES 5 AND UP ONLY. Do not allow younger children to use. 4.
Assembly Instructions 4. Thread the left Pedal (5a) onto the crank clockwise. Thread the right Pedal (6a) onto the crank counterclockwise. 1. Examine Handlebar (12) assembly to make sure that rail on Insert (17) is aligned with and fits into slot on bottom of Handlebars, as shown to the right. 2. Insert Handlebar assembly into Frame (8) as shown in Figure A. Note: Although they are illustrated separately, the Bolt (13) and Insert (17) should already be part of the Handlebar assembly at this point. 3.
6. Bolt the Seat (9) to the Frame (8) at the desired height using two bolts and nuts. 7. Place a Flat Washer on the rear axle portion of the Rear Frame (10). Next place the Rear Wheel (11) on the axle (valve stem facing outward). Add another Flat Washer and secure with an axle cap. Seat (9) Frame (8) washer Figure D: Seat Installation washer axle cap Rear Frame (10) Rear Wheel (11) Figure E: Wheel Installation 8. Test the Tricycle by checking all bolts and connections for tightness.
Operation 1. Inspect before every use; do not use if parts loose or damaged. Check and tighten hardware periodically. 2. Do not use in unstable or dangerous area. Tipping over can cause injury. Do not use in areas where vehicles may be present, such as parking areas, driveways, or roads. 3. AGES 5 AND UP ONLY. Do not allow younger children to use. 4. WEAR PROPER SAFETY HELMET AND COMPLETE SAFETY GEAR WHEN RIDING. 5. Responsible adult must supervise during use. 6. Use as intended only. 7.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Assembly Diagram 13 12 17 3 1 5b 2 9 4 7b 6a 6b 8 5a 7a 15 10 14 Item 60652 11 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
