Product manual

OPERATION
Figure 5 — Operation
Step 4: Press the TRIGGER (#7) to begin cleaning
Page #7 -- SKU: 32860
Step 1: Set the compressor’s pressure regulator to 90 PSI. Do not set the compressor’s outlet
regulator over 90 PSI.
Step 2: Connect the Spark Plug Cleaner to the air compressor’s hose. If leaking is detected,
disconnect the air hose and repair before use.
Step 3: Insert the spark plug, electrode side down, into the RUBBER COVER (#6) of the Spark
Plug Cleaner as shown in Figure 5.