Product manual

Figure 4 — Clamp Installation
Step 6: Tighten the CLAMP SCREW to secure the BAG.
Air Connection
Step 1: For proper operation of the Spark Plug Cleaner, remove the AIR INLET (#13) from the
BODY.
Step 2: You will need a Union fitting (sold separately) before you can connect your Spark Plug
Cleaner to an air compressor.
Step 3: Attach the Union fitting to the Spark Plug Cleaner and tighten.
Step 4: Attach an Air Coupler (sold separately) to the Union fitting if desired. This is a useful
accessory as it allows quick-coupling action when using a variety of tools with the same
air compressor.
Step 5: Your Spark Plug Cleaner is ready for use.
Page #6 -- SKU: 32860
Step 5: Loosen the CLAMP SCREW (#4) and place the CLAMP (#3) over the bag with the
CLAMP SCREW towards the top of the BODY as mounted on the wall as shown in
Figure 4.