IMPORTANT SAFETY INFORMATION In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
17. Keep installation area clean and well lit. 18. Install out of reach of children. 19. Keep bystanders out of the area during installation. 20. Do not install when tired or when under the influence of drugs or medication. 21. People with pacemakers should consult their physician(s) before installation and/or service. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. Service Precautions 1.
Mounting Holes Adjusting Frame (3) The solar panel should face towards south to expose the solar panel to the maximum possible sunlight. 4. Connect one end of an appropriate length of 12 AWG Insulated Wire to the Ground Rod, using a Ground Clamp (not included). See Figure 2. 5. Connect the other end of the 12 Gauge Insulated Wire to the Black/Negative Terminal (6) of the Solar Fence Controller. See Figure 2. Main Body (4) Connecting Fence Line to Solar Fence Controller Figure 1 3.
4. Angle face of Controller Frame toward true south1 according to chart that follows: Latitude 0-4° 5-20° 21-45° 46-64° 65° or more Solar Panel Angle 10° Latitude + 5° Latitude + 10° Latitude + 15° 80° Wiring Note: Only a licensed electrician and a licensed building contractor can safely design and implement a grid tie-in system. Any grid tie-in system must meet all applicable building and electrical codes, and must meet standards established by the area power company. 1.
Servicing Procedures not specifically explained in this manual must be performed by a qualified technician. 2. To remove Battery, loosen and remove Screw (12) located at rear of Fence Control. Open Battery Compartment Door (11). Pull Battery out of unit and disconnect Black wire that is connected to the negative battery terminal. TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK: Before service, maintenance or cleaning: a.
Parts List and Assembly Diagram Part 1 2 3 4 5 6 7 2 Description Qty. Panel Fixing Plate Solar Panel Angle Adjusting Frame Main Body Power Switch Terminals Indicating Lamp 3 13 1 1 1 1 1 1 2 1 5 7 Part 8 9 10 11 12 13 Description PCB Bottom Case Battery (6V) Battery Compartment Door Screw Switch Cover 6 8 9 4 10 Qty. 1 1 1 1 6 1 11 12 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
