COLOR SECURITY CAMERA 95914 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
not avoided, could result in minor or moderate injury. Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. NOTICE is used to address practices not related to personal injury.
atmospheres, such as in the presence of flammable liquids, gases, or dust. Electrically powered products create sparks which may ignite the dust or fumes. times. Proper footing and balance enables better control in unexpected situations. 3. Electrical Safety 1. 2. 3. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
5. 6. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect this product’s operation. If damaged, have the product serviced before using. Many accidents are caused by poorly maintained products. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one product may become hazardous when used on another product. DC Adapter into an electrical outlet in a damp or wet location. 3.
. 6. 7. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.
Specifications AC/DC Adapter 120 V~ / 60 Hz Input 9 VDC /200 mA Output Camera Resolution 300 pixel Camera Cable 80’ Camera Angle 40° Down, 20° Up Minimum Illuminance 0 Lux up to 15’ Night Vision Type Infrared LED’s with Low Light Sensor Figure A 1. Before mounting the Security Camera to the chosen surface, adjust Camera to the required angle. Use a screwdriver (not included) to loosen the bolt in the center of the Camera Base.
WOOD SCREW (NOT INCLUDED) FIGURE B CAMERA (1) FIGURE D CAMERA CABLE 5. b. Use three 1/4” diameter wood screws to attach the Color Security Camera against the surface to which the Camera is to be mounted. (See Figure B.) For overhead mounting, reposition the Camera mount and use the mounting holes at the top rear of the Camera (1). (See Figure D.) WARNING! Verify that installation surface has no hidden utility lines before drilling or driving screws. FIGURE C MODULAR JACK (4) EXTENSION CABLE (3) 4.
FIGURE F TELEVISION (NOT INCLUDED) AC/DC ADAPTER (2) MODULAR JACK (4) EXTENSION CABLE (3) 6. Insert the YELLOW PLUG of the Color Security Camera’s Extension Cable (3) into the television’s VIDEO INPUT PORT. (See Figure F.) 7. Insert the WHITE PLUG of the Color Security Camera’s Extension Cable (3) into the television’s AUDIO INPUT PORT. (See Figure F.) 8. Insert the BLACK PLUG of the Color Security Camera’s Extension Cable (3) into the AC/DC Adapter’s (2) BLACK PLUG. (See Figure F.) 9.
INSPECTION, MAINTENANCE, AND CLEANING To prevent serious injury: Unplug the AC/DC Adapter from its electrical outlet before inspection, maintenance, or cleaning. 1. BEFORE EACH USE, inspect the general condition of the Color Security Camera. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If a problem occurs, have the problem corrected before further use.
Parts List and ASSEMBLY DIAGRAM Part Description Q’ty 1 Camera 1 2 AC/DC Adapter 1 3 Extension Cable 1 4 Modular Jack 1 1 2 3 4 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 95914 For technical questions, please call 1-800-444-3353.
