Lathe Stand Model 95647 (For Use With Item 43681 - Gap Bed Lathe) Model 43681 (Lathe Not Included) Assembly & Operating Instructions www.harborfreight.com Copyright © 2006 by Harbor Freight Tools. All Rights Reserved. No portion of this manual or any artwork contained herein may be reproduced in any manner, shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353.
SPECIFICATIONS Material Mild Steel Frame Metal Thickness .11” Thick Carbon Steel Left Cabinet Inside 14-/14” L x 13-1/4” W x 21-31/32” H Dimensions Right Cabinet Inside 9-1/4” L x 13-1/4” W x 21-31/32” H Dimensions Overall Dimensions 66-15/16” L x 22-13/16” W x 27” H Max Weight Capacity 1,320 lbs.
SAFETY WARNING & CAUTIONS READ ALL INSTRUCTIONS BEFORE USING THIS STAND! 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use electrically powered equipment in the presence of flammable gases or liquids. 3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle machines, tools, or equipment. 4. STORE IDLE EQUIPMENT.
13. STAY ALERT. Watch what you are doing. Do not operate Lathe or assemble or setup this Stand when you are tired. 14. DO NOT ASSEMBLE WHILE UNDER THE INFLUENCE OF ALCOHOL, DRUGS, OR PRESCRIPTION MEDICINES. 15. CHECK FOR DAMAGED PARTS. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function.
. Once the Stands are positioned properly on a solid level floor, place the Lathe’s oil pan on them. Align the mounting holes in the oil pan with the holes in the Stands. If needed, place shims (not in cluded between the oil/chip tray and the Lathe Stands. Check the level and position of the Stands again to be sure that when the Lathe is positioned on the stands and chip tray it will be level, solid and aligned with the mounting holes in the Stands and tray.
Stand Parts List P art N o. 1 2 3 4 5 6 7* 8 9 10 11 12 D escription H eadstock S tand H eadstock C onnecting S trip N ut M 6 C onnecting P late betw een S tands Flat W asher 6 B olt M 6x10 Tray* Flat W asher S pring W asher B olt M 12x50 Tailstock S tand Tailstock C onnecting Strip Q ty. 1 1 6 1 12 12 1 6 6 6 1 1 *Please Note: Part 7 (Tray) is not included with the Stand, but with the 43681 Gap Bed Lathe.
Please note: Oil tray is not included with Stand.
WARRANTY LIMITED 90 DAY/1 YEAR WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser for a period of ninety days from date of purchase that the motor/engine, the belts (if so equipped), and the blades (if so equipped) are free of defects in materials and workmanship.
