User Guide

SKU 93507 For technical questions, please call 1-800-444-3353. Page 3
PRODUCT SPECIFICATIONS
Electrical Requirements 120/230 VAC (Dual voltage capability)
Motor Type: 1 HP /Single Phase
60 Hz / 1720 RPM
9 Amps @ 120 Volt
4.5 Amps @ 230 Volt
Power Cord Type & Length Provided: 120 volt / 6’4” Long
Power Cord Plug Type Provided: 120 volt, 3-Prong
Overload Equipped: Resettable Circuit Breaker
Cutting Capacity 7” (Round Stock) 7” x 12” (Flat/Square Stock)
Blade Speeds (FPM) 260 / 178 / 132 / 86
Required Blade Size ¾” Wide x .032” Thick x 93” Long (Included)
Required V-Belt Size 3V-270 (Included)
Vise Capacity/Miter Angles 10-1/2” / 0-45 Degrees in 1 Degree Increments (Right Only)
Throat Depth 9-5/8”
Coolant Pump 120 VAC / 60 Hz / 0.6 Amps
Coolant Tank Capacity 9 Quarts
Overall Dimensions 15-1/2” Long x 46-1/2” Wide x 62-7/8” High
Net Weight 312 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
1.
2.
3.