User Guide

SKU 93507 For technical questions, please call 1-800-444-3353. Page 21
COOLANT PUMP
VALVE
(159)
COOLANT PUMP
TOGGLE SWITCH
(11)
HYDRAULIC CYLINDER
(20)
POWER CORD PLUG
(38)
MOTOR
TOGGLE
SWITCH
(37)
SAW BLADE
(127)
LARGE VERTICAL CUTTING PLATE
(182)
SAW HEAD ASSEMBLY
FIGURE U
(See Figure U.)
5. Turn the Coolant Pump Valve (159) to its “OPEN” position. Then, turn the Cool-
ant Pump Toggle Switch (11) to its “ON” position. (See Figure U.)
6. Turn the Motor Toggle Switch (37) to its “ON” position. (See Figure U.)
7. WARNING! Cut only flat workpieces when the Bandsaw is in its vertical
position. Never attempt to cut pipes or other round objects with the Bandsaw in
its vertical position.
8. Before cutting, turn on the Bandsaw and check for excessively loose Saw Blade
(127) tension or machine vibration. If this is found, turn off the Bandsaw and
correct the problem before using. (See Figure U.)
9. Set the workpiece on the Large Vertical Cutting Plate (182), making sure to keep
downward pressure on the workpiece throughout the cutting process.
(See Figure U.)
REV 10/06