User Guide

SKU 93507 For technical questions, please call 1-800-444-3353. Page 15
OPERATING INSTRUCTIONS
WARNING! Always make sure the Toggle Switch (37) for the Bandsaw and
the Toggle Switch (11) for the Coolant Pump are both in their “OFF” position and
the tool is unplugged from its electrical outlet prior to making adjustments to the
tool.
Selecting Proper Blade Speeds:
When using the Bandsaw always change the blade speed to best suit the materi-
al being cut. The Blade Speed Chart illustrates several settings for several types
of materials. (See Figure K.)
SPINDLE PULLEY MOTOR PULLEY
FIGURE K
Using The Quick Vise:
The Bandsaw is equipped with a “quick action” vise which allows you to instantly
position the moveable Front Vise (94). To operate, turn the Handle Wheel (47)
counterclockwise 1/2 turn and move the Front Vise to the desired position. Then
tighten the Front Vise against the workpiece by turning the Handle Wheel clock-
wise. (See Figure L.)
FRONT VISE (94)
HANDLE WHEEL
(47)
FIGURE L
Material Blade Speed (FPM) Belt Groove Used
Motor Pulley Saw Pulley
Tool, Stainless
Alloy Steels, Bearing
Bronze
86 Small Largest
Medium to High Carbon
Steels, Hard Brass or
Bronze
132 Medium Large
Low to Medium Carbon
Steels, Soft Brass
178 Large Medium
Aluminum,
Plastic
260 Largest Small
REV 10/06