Product manual

Page 10 For technical questions, please call 1-888-866-5797. Item 69066
Work Piece and Work Area Set Up
1. Designate a work area that is clean and well-
lit. The work area must not allow access by
children or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
3. Secure loose work pieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
This is especially critical for plunge cuts.
5. Using a glove, push blade holder all the
way back. The workpiece must be thinner than
minimum blade extension.
CAUTION! To prevent injury, do not use on
workpieces thicker than the minimum blade
extension at their maximum thickness.
Blade tip can strike workpiece and may shatter.
Workpieces that are Too Thick
PVC Pipe
Properly Sized Workpieces
PVC Pipe
Figure A: Maximum Workpiece Thickness
SAFETY OPERATION MAINTENANCESETUP