Product manual

SKU 94562 For technical questions, please call 1-800-444-3353 PAGE 6
FIGURE B
RAM
(13)
HANDLE
(21)
RELEASE VALVE
(4)
BASE
(1)
2. Place the end of the Handle (21) over the Release Valve (4), and turn the Handle
counterclockwise to fully lower the Ram (13). Then, remove the Handle.
(See Figure B.)
PILLAR
BOOM
INSERT PIN & R-PIN HERE
INSERT PIN & R-PIN HERE
RESERVOIR
(16)
SHOP CRANE
(NOT INCLUDED)
FIGURE C
o
FILLER PLUG
(17)
3. Lower the Boom on the shop crane (not included). (See Figure C.)
With assistance, align the mounting hole in the Ram (13) with the mounting hole 4.
located in the Boom of the shop crane. Insert one Pin completely through both
mounting holes. Then, secure the Pin in place with one R-Pin.
(See Figures B and C.)
Align the two mounting holes in the Base (1) of the Long Ram Jack with the mount-5.
ing hole located in the Pillar of the shop crane. Insert the remaining Pin completely
through the mounting holes in the Base and the Pillar. Then, secure the Pin in place
with the remaining R-Pin. (See Figures B and C.)
IMPORTANT: 6. The Long Ram Jack already contains some hydraulic oil in its Res-
ervoir (16). Even so, it is recommended that you check the oil level in the Reservoir