Product manual

Page 2SKU 95607
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Motor 110 V~ / 60 Hz / 1 Phase
Speed Range 750 - 3200 RPM
Drive Spindle Size
3
/
4
” x 16 TPI
Swing Over Bed 8”
Distance Between Centers 13”
Spindle Bore
7
/
16
”
Quill Travel 12”
Head Stock 4-
1
/
8
” H
Work Tolerance 0.005”
Bed Dimensions 22-
3
/
4
” L x 3” W x 5-
3
/
4
” H
Tailstock Taper MT1
V-belt size 6 x 516 mm
Net Weight 46 lb.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep work area clean and well lit. Cluttered benches and invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
1.
2.