Product manual

Page 27For technical questions, please call 1-800-444-3353.Item 61229
SAFETYOPERATIONNETWORK SETTINGS
Search > Log
Figure AJ
1. Log Type: Select Log type.
2. Start Time (Date): Enter start date.
3. End Time (Date): Enter end date.
4. Click Search to populate table.
5. Click Backup to backup log file, then
click OK when backup finished.
Format Drives
Device > HDD
Figure AK
No. ID number of drives
State
OK - Hard drive installed
No disk - No hard drive installed
Free/total Free Space/Total Space
Free Time Recording time available
Figure AL
1. Overwrite: Select how long to save recordings
on Hard Disk Drive before overwriting.
Note: The drive will save recordings as long as
possible before overwriting while in Auto mode. If
Close is selected, the drive will not be overwritten.
2. Format Hard Drive:
a. Click Select box for drive to format.
b. Click Format HDD.
c. Click OK.
d. When formatting is finished, click OK.
3. Format USB Drive:
a. Install drive into USB port.
b. Click Format USB.
c. Click OK.
d. When formatting is finished, click OK.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
PTZ Camera
Device > PTZSetings for PTZ (Pan, Tilt, Zoom) camera (sold separately).
Input information according to PTZ
camera manufacturer instructions.
Figure AM