Product manual

Page 24 For technical questions, please call 1-800-444-3353. Item 61229
SAFETY OPERATION NETWORKSETTINGS
Maintain Hard Drive
Advanced> Maintain
Set up Reboot Cycle, Update Software, Manually
Restore Default Settings, Reboot And Shut Down.
Auto Maintain
Auto Reboot
Figure AA
1. Auto Maintain: Enables Auto Reboot.
2. Auto Reboot: Select when to Reboot system.
a. Everyday: Enter time for Reboot.
b. Every Week: Enter day of week
and time for reboot.
c. Every Month: Enter day of
month and time for reboot.
3. Update: Used for updating firmware using
a USB drive. Do not update firmware
unless device is not working properly and
Customer Service instructs you to do so.
4. Load Default: Click to restore all
system default settings.
5. Reboot: Click to manually reboot system.
6. Shut Down: Click to manually shut down system.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
Alerts
Advanced > Events
Set up alerts for when the hard drive has no disk space,
when there is a disk error or a camera loses video.
Figure AB
1. Event Type: Select Event type.
2. Enable: Check box to Enable
or uncheck to Disable.
3. Show Message: Check box to show a
message or uncheck to not show a message.
4. Buzzer: Click drop-down box to choose
Buzzer duration or turn Buzzer off.
5. Send Email: Check box to send an email
or uncheck to not send an email.
Note: The DVR must be connected to the
Internet for email function to work. (See
Network > Network on page 22.)
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.